Extron electronic - MBB 100

Below are all the different types of Extron electronic. Select the device of your choice, to download the manual

Contents

MBB 100 Back of the Rack Mounting Kit 1 Only Extron products that are 3 inches deep and most IP Link products can be mounted using this kit part number 70 367 01 This kit allows A V products to be vertically mounted to the front or rear rack supports and face either the front or the rear of the rack Refer to the drawing on the opposite side of this card 1 Remove any installed rubber feet from the unit 2 Remove two screws from one side of the unit Retain the screws for possible later reassembly 3 Attach one bracket to the side of the unit using the longer screws included in the kit 4 Repeat steps 2 and 3 on the other side of the unit 5 Mount the unit to the rack using the two included rack screws v Extron USA West Extron USA Ea ...